Correct operation of the screw conveyor
February 02, 2021
With the increasing advancement of production technology, screw conveyors have also been used more and more widely, but due to people's inattention or lack of common sense, there are always some accidents of one kind or another.
a. Before using the screw conveyor, check whether the running parts, the tape buckle and the carrying device are normal, and whether the protective equipment is complete. The tension of the tape must be adjusted to an appropriate level before starting.
b. The fixed screw conveyor should be installed on a fixed basis according to the specified installation method. The mobile screw conveyor should be wheeled before it is officially run.
Wedge with a triangular wood or with a brake. In order to avoid walking in the work, when there are multiple conveyors working in parallel, there should be one meter between the machine and the machine.
c. The belt conveyor should start at no load. After the operation is normal, the material can be fed. It is forbidden to drive after entering the material first.
d. When several conveyors are operated in series, they should start from the discharge end and start in sequence. Only after all normal operation can the material be fed.
e. Pedestrians or passengers are prohibited on the conveyor belt.
f. Before stopping, you must stop the feeding, and then stop the storage on the belt before parking.